Release v0.8.7

Help/Api.txt

+Api has two interfaces : json and gui (over http)
+
+To use it you must enable it first, by using the --api-enable parameter.
+Set your rig name with --api-rig-name rig_name.
+
+After you started the miner, you can access the GUI stats in your browser :
+http://127.0.0.1:21550/stats
+
+Or the json : http://127.0.0.1:21550
+
+
+There are also three other parameters that can help you to restart miner, reboot or shutdown your machine remotely :
+
+--api-rig-restart-url
+This should be a unique string, which accessed in browser results in a computer restart. Miner needs to have admin privileges.
+
+--api-rig-shutdown-url
+This should be a unique string, which accessed in browser results in a computer shutdown. Miner needs to have admin privileges.
+
+--api-miner-restart-url
+This should be a unique string, which accessed in browser restarts SRBMiner-MULTI.
\ No newline at end of file

Help/Cmd_Common_Parameters.txt

+Parameters:
+
+--a0-is-zil						(used with ETH-ETC+ZIL mining)
+--adl-disable                   (disable ADL)
+--algorithm value               (algorithm/s to use, separate values with ;)
+--api-enable                    (enable statistics API)
+--api-port value                (port where statistics API is reachable - default 21550)
+--api-rig-name value            (identifier name for your rig in statistics API)
+--api-rig-restart-url value     (user defined url which accessed in browser triggers computer restart)
+--api-miner-restart-url value   (user defined url which accessed in browser triggers miner restart)
+--api-rig-shutdown-url value    (user defined url which accessed in browser triggers computer shutdown)
+--background                    (run miner in background, without console window)
+--config-file filename          (use config file other than config.txt)
+--disable-cpu                   (disable cpu mining)
+--disable-gpu                   (disable gpu mining)
+--disable-extranonce-subscribe  (don't send mining.extranonce.subscribe to pool)
+--disable-worker-watchdog		(disable crash detection)
+--disable-gpu-tweaking          (disable gpu tweaking options (def. is enabled)
+--enable-opencl-cleanup         (release ocl resources on miner exit/restart)
+--enable-restart-on-rejected    (enable miner auto restart on too many rejected shares. Set number with --max-rejected-shares)
+--enable-workers-ramp-up		(enable workers slow start)
+--extended-log                  (enable more informative logging)
+--forced-shutdown               (never try to free resources on restart/shutdown)
+--give-up-limit value           (number of times to try connecting to a pool before switching to the next pool)
+--gpu-auto-tune value           (runs miner in a mode that tries to find best settings per GPU. 0-disabled, 1-normal, 2-fast [def. is 2])
+--gpu-errors-alert value        (notify when number of result validation errors for any GPU reaches this value [def. is 0 - disabled])
+--list-algorithms               (list available algorithms)
+--list-devices                  (list available gpu devices)
+--log-file filename             (enable logging to file)
+--log-file-mode value			(defines logging mode, 0-2 [def. is 0 - truncate])
+--main-pool-reconnect value     (time, how often to try to reconnect back to the main pool. def. is 10 minutes, min. is 2 minutes)
+--max-no-submit-responses value (max number of no-responses from pool to our submit messages before reconnecting [def. is 5])
+--max-no-share-sent value       (time, if no share is accepted from the pool for x time, restarts miner [def. is 0 - disabled])
+--max-rejected-shares value     (max number of allowed rejected shares on a connection. def. is 20 if '--enable-restart-on-rejected' option enabled)
+--miner-priority value			(main process priority, 1-5 where 5 is highest (def. is 3 - normal))
+--multi-algorithm-job-mode value(how miner handles jobs when mining multiple algorithms. 0-no redirect, 1-redirect to a0, 2-redirect to first available, 3-redirect a1 to a0 only if a0 not working. def. is 0)
+--pools-file filename           (use pools file other than pools.txt)
+--reboot-script-gpu-watchdog    (filename, if set it turns off built in restart procedure on gpu failure, and instead runs this script)
+--retry-time value              (time, how much to wait before trying to reconnect to a pool)
+--reset-vega                    (disable/enable Vega video cards on miner start)
+--set-compute-mode              (sets AMD gpu's to compute mode & disables crossfire - run as admin)
+--setup                         (interactive mode to create basic configuration)
+--startup-script filename       (run custom script on miner start - set clocks, voltage, etc.)
+--shutdown-temperature value    (if this temperature is reached, miner will shutdown system (ADL must be enabled))
+--verthash-dat-path value		(verthash.dat location, if not using default)
+
+
+; is used to separate algorithms, ! is used to separate parameters for an algorithm
+On Linux you need to escape the ; character with a backslash! ( \; )
+When setting any of the parameters don't use " or ' around the value!
+Parameters that take a TIME value must be set in SECONDS!
+
+
+--log-file-mode
+0 - clear content of existing log file before writing
+1 - append to existing log file's end
+2 - add datetime stamp to log's name so it creates a new log file on every miner start
\ No newline at end of file

Help/Cmd_Cpu_Parameters.txt

+Parameters:
+
+--cpu-threads                   (number of cpu threads to use for mining, separate values with ;)
+--cpu-threads-intensity			(thread intensity, can be 1 or 2. Def. is 1, separate values with ; and !)		
+--cpu-threads-priority value    (worker thread priority, 1-5 where 5 is highest (def. is 2), separate values with ;)
+--cpu-affinity value            (thread affinity bitmask, hex or decimal value, separate values with ;)
+
+--disable-cpu-optimisations     (use only SSE2 for cpu mining)
+--disable-huge-pages            (disable usage of huge pages)
+--disable-hw-aes                (use only soft AES for cpu mining)
+--disable-msr-tweaks            (disable extra tweaks for some CPU algorithms(def. is enabled)
+--disable-numa                  (disable binding to numa nodes)
+--msr-use-preset				(defines MSR preset to use 0-2)
+--msr-use-tweaks value          (defines MSR tweaks to use 0-4, | 0 - Intel, 0,1,2,3,4 - AMD |)
+
+
+Order of the parameters is important! Always set these parameters AFTER --algorithm parameter!
+
+; is used to separate algorithms, ! is used to separate parameters for an algorithm
+On Linux you need to escape the ; character with a backslash! ( \; )
+When setting any of the parameters don't use " or ' around the value!
+
+
+--cpu-threads-intensity takes values for every cpu worker separated with !
+Example : --cpu-threads 3 --cpu-threads-intensity 1!1!2	[ means worker 0 intensity is 1, worker 1 intensity is 1, worker 2 intensity is 2 ]
+Example : --cpu-threads 16 --cpu-threads-intensity 2	[ means apply intensity 2 to all 16 workers ]
+
+--msr-use-preset can be used to select from 3 predefined presets (0,1,2) of register values. If not used, preset is auto selected.
+If combined with --msr-use-tweaks parameter, you will use values from the defined preset.

Help/Cmd_Gpu_Parameters.txt

+Parameters:
+
+--gpu-id value                  (gpu id/s from --list-devices, separate values with ; and !)
+--gpu-intensity value           (gpu intensity, 1-31 or if > 31 it's treated as 'raw-intensity', separate values with ; and !)
+--gpu-auto-intensity value		(0-disabled, 1-light, 2-normal, separate values with ; and !)
+--gpu-extra-config				(additional config for some algorithms, separate values with ; and !)
+--gpu-off-temperature value     (gpu turn off temperature, separate values with ; and !)
+--gpu-adl-type value            (ADL to use (1-3), separate values with !)
+--gpu-boost value				(number from 0-50, separate values with ; and !)
+--gpu-tweak-profile value       (number from 0-10, 0 disables tweaking, separate values with ; and !)
+--gpu-buffer-mode value 		(how to handle buffers when using --multi-algorithm-job-mode 3. 0-leave in vram, 1-release on algorithm switch. Default is 0, separate values with ; and !)
+--gpu-ethash-mode value         (1 or 2. Sets number of buffers used for DAG, separate values with ; and !)
+--gpu-cn-mode value				(0 or 1. Default is 0. If you have a weaker GPU try 1. separate values with ; and !)
+--gpu-manual-tuning				(enable manual GPU tuning through configuration file)
+--gpu-progpow-mode value		(1, 2 or 3. Sets how progpow program is created, separate values with ; and !)
+--gpu-progpow-preload value     (number from 0-16. Sets how many periods to pre-create. Def. is 2)
+--gpu-autolykos2-preload value  (number from 0-6, how many datasets to pre-create, depends on free GPU memory. def. is 0,  separate values with ; and !)
+
+Order of the parameters is important! Always set these parameters AFTER --algorithm parameter!
+
+; is used to separate algorithms, ! is used to separate parameters for an algorithm
+On Linux you need to escape the ; character with a backslash! ( \; )
+When setting any of the parameters don't use " or ' around the value!
+
+
+Important:
+
+If algorithm is using 2 threads per GPU (auto chosen or  manually set), there is a chance for memory leaking if intensity value for the second thread is too high.
+This can cause system crash, gpu crash or an unstable system!
+
+
+--gpu-ethash-mode:
+1 - Create 1 buffer for DAG on GPU if driver allows big enough allocation
+2 - Create 2 buffers for DAG on GPU
+
+
+--gpu-buffer-mode:
+0 - Leave buffers in memory for both algorithms when switching. Use if you have enough VRAM on the GPU to store all data from both algorithms.
+1 - Recreate buffers when switching algorithms. This way you can 'dual mine' algorithms that together wouldn't fit in VRAM.
+
+
+--gpu-progpow-mode:
+1 - Use kernel 1. This kernel uses VRAM for DAG only
+2 - Use kernel 2. This kernel uses VRAM for DAG and ~+150-200mb (depends from used intensity)
+3 - Use kernel 3. This kernel uses VRAM for DAG and ~+300-500mb (depends from used intensity)
+
+
+--gpu-autolykos2-preload
+
+Pre-create the dataset/s for the next block/s while mining the current block.
+Additional GPU memory needed.
+Reported hashrate can vary a little bit. Overall it should increase your pool hashrate by a few percent.
+
+There are 2 types of preloading :
+- If you set preload value to 1 it will constantly keep preloading the next block (preferred for 4-8GB gpu's)
+- If you set preload value to > 1 it will preload X number of datasets, and when a block arrives that isn't yet loaded, it will be created so miner can
+start working on it, and then again X number of datasets will get preloaded.
+
+

Help/Cmd_Pool_Parameters.txt

+Parameters:
+
+--pool value                    (pool address:port, separate values with ; and !)
+--wallet value          		(user wallet address, separate values with ; and !)
+--worker value                  (worker name or rig id, separate values with ; and !)
+--password value                (pool password, separate values with ; and ! [to escape separator characters use use #; and #!)
+--diff-factor value				(custom difficulty multiplier, separate values with ; and !)
+--tls value                     (use TLS, true or false, separate values with ; and !)
+--esm value                     (ethash stratum mode [0, 1], separate values with ; and !)
+--nicehash value                (force nicehash, true or false, separate values with ; and !)
+--job-timeout value             (time, if no job received for this period, miner will reconnect. Disabled by default, separate values with ; and !)
+--max-difficulty value          (number, if pool difficulty is above this value miner will reconnect to the pool, separate values with ; and !)
+--start-block-height value      (number, start mining when defined block height is reached. Pool must send this info, separate values with ; and !)
+--keepalive value               (true or false, not every pool supports this, separate values with ; and !)
+--send-stales value             (send stale shares to pool, true or false, separate values with ; and !)
+--algo-min-time value           (time, used with algorithm switching capability, minimum time to mine same algorithm. Def. is 10 min.)
+
+
+; is used to separate algorithms, ! is used to separate parameters for an algorithm
+On Linux you need to escape the ; character with a backslash! ( \; )
+When setting any of the parameters don't use " or ' around the value!
+Order of the parameters is important, always put --algorithm as the first parameter, then --pool and then set the rest!
+
+
+If pool name contains 'nicehash' it auto enables nicehash mode
+To enable TLS use stratum+tls:// or stratum+ssl:// as a prefix or set with --tls parameter
+When defining pools use '!' to define failover pools
\ No newline at end of file

Help/Config_File_Common_Parameters.txt

+Parameters:
+
+"algorithm" 					: algorithm name
+"disable_cpu"					: disable cpu mining, true or false
+"disable_gpu"					: disable gpu mining, true or false
+"giveup_limit" 					: number, how many times to try connecting to a pool before switching to next pool from pools.txt. If set to 0 miner will quit and won't retry connecting.
+"timeout" 						: time, when is a connection to a pool treated as timed out
+"retry_time" 					: time, how much to wait before trying to reconnect to a pool
+"reboot_script_gpu_watchdog" 	: filename to a batch file in miner directory, if set it turns off built in miner reset procedure on gpu failure, and instead runs this script
+"main_pool_reconnect" 			: time,(minimum is 3 minutes or 180 sec), how often to try to reconnect back to the main pool. Default is 10 minutes.
\ No newline at end of file

Help/Config_File_Cpu_Parameters.txt

+Parameters:
+
+"cpu_threads"					: how many cpu threads to use for mining
+"cpu_affinity"					: thread affinity bitmask (can be digit, or hex string)
+"cpu_priority"					: miner process priority, 1-5 where 5 is highest
\ No newline at end of file

Help/Config_File_Gpu_Parameters.txt

+Parameters:
+
+"gpu_intensity" 				: 1-31, if set to 0 miner will try to find best settings
+"gpu_shutdown_temperature" 		: number between 0-100, if this temperature is reached, miner will shutdown system (ADL must be enabled)
+"gpu_off_temperature" 			: temperature in C, when to turn off GPU if it reaches this value. After value - 15, the GPU is turned on again automatically
+"gpu_tweak_profile" 			: number 0-10 , applies tweaks to the GPU that can increase hashrate. 0 - not using any tweaks, 10 - max tweaking. If you add L after the number it will use the low settings (ex. "4L")
+"gpu_ethash_mode"				: number 1-2, Sets number of buffers used for DAG
\ No newline at end of file

Help/Config_File_Pool_Parameters.txt

+Parameters:
+
+"algorithm" 					: used to inform miner which algorithm is this pool using (--list-algorithms)
+"pool" 							: address:port
+"wallet" 						: your wallet
+"password" 						: your password
+"tls"							: true or false, if true miner will use SSL/TLS to connect to pool
+"worker"						: worker name
+"nicehash" 						: true or false, set this to true if you are using Nicehash
+"send_stales"					: true or false, set this to false if you don't want to send stale shares to the pool (Default is true)
+"esm"							: ethash stratum mode (0 - eth-proxy, 1 - miner-proxy, default is 0)
+"keepalive"						: true of false, not every pool supports this
+"job_timeout" 					: number in seconds, if no job is received for this period, miner will reconnect to the pool (Default is off)
+"max_difficulty" 				: decimal number, if pool difficulty is above this value miner will reconnect to the pool
+"start_block_height" 			: number, start mining when defined block height is reached. Pool must send this info
\ No newline at end of file

Help/Gpu_Auto_Tune.txt

+Auto-tune tries to find good settings for your GPU's, and it can be controlled with parameter '--gpu-auto-tune'
+Your final results will probably be different every time, that's because auto tune searches for the best settings live, and it's not a predefined value.
+
+Modes:
+
+0: disabled
+1: normal
+2: fast
+
+By default auto-tune is disabled and set to '0'. You can enable it by setting '--gpu-auto-tune' value to 1 or 2.
+Sometimes auto-tune won't return you the best settings, and also sometimes it can happen that it won't apply the auto detected settings, so you need to manually set the --gpu-raw-intensity value it returned.
+
+Every GPU thread can be put into auto-tune mode, so you can combine stuff here, for example run a GPU with 2 threads, and set intensity for one of the threads manually, and leave the second on auto-tune.
+
+Check the examples, to get an idea on how to use it.
+
+After getting the result/s (--gpu-intensity), you should set the parameters manually in the batch file and run the miner, even if it will continue mining after the auto tune process is finished.
+It's better to use it only for getting the values and then running the miner in normal mode (not auto tune mode)
\ No newline at end of file

Help/Gpu_Manual_Tuning.txt

+Supported:
+[ VEGA56/64/FE/VII ] & [ RX 550/560, RX 470/480/570/580/590 ] & [ R9 280/290/380/390 ]
+
+Change your memory timings in real time, while mining!
+If you previously started a monitoring software like HWinfo or GPU-Z, tweaks won't get applied, a machine restart is needed!
+
+----------------------------------------------------------------------------------------
+
+To enable manual tuning of memory timings, add parameter : --gpu-manual-tuning
+Optionally you can define a filename for the configuration file ( --gpu-manual-tuning tuning-ethash.txt ) so you can define a configuration for every algorithm.
+
+Miner needs to be run with admin/root privileges, just like with --gpu-tweak-profile and --gpu-boost
+
+
+Supported timings:
+------------------------------------
+
+HBM2 & GDDR5
+------------
+CKSRE
+CKSRX
+CL
+RC
+RP
+REF
+RFC
+FAW
+RAS
+
+
+GDDR5
+------------
+RCDR
+RCDRA
+RCDW
+RCDWA
+RAS2RAS
+TRP
+
+
+HBM2
+------------
+CWL
+MOD
+MRD
+PD
+RCAB
+RCDRD
+RCDWR
+RCPB
+RDWR
+RPAB
+RPPB
+RPRDA
+RPWRA
+RRDL
+RRDS
+RTP
+WR
+WRRD
+WTRL
+WTRS
+
+------------------------------------
+
+When you start SRBMiner first time with the --gpu-manual-tuning parameter added, an empty configuration file will be created ('gpu_manual_tuning.txt')
+
+It might look like this:
+
+{
+    "gpu_devices": [
+        {
+            "id": 0,
+            "enabled": true
+        },
+        {
+            "id": 1,
+            "enabled": true
+        },
+        {
+            "id": 2,
+            "enabled": true
+        }
+    ]
+}
+
+"id"
+GPU ID you get when you run --list-devices (GPU0, GPU1, GPU2)
+
+"enabled"
+true or false, if false then settings for that GPU won't be applied
+
+
+Now it's up to you to add the timings and their values for every GPU to this configuration file.
+If you want to use the default (read from bios) value, put 0 for value.
+Use uppercase letters and exact namings as on the upper list of supported timings (best is to copy/paste from there)
+
+For example :
+
+{
+    "gpu_devices": [
+        {
+            "id": 0,
+            "enabled": true,
+			"REF": 13,
+			"RFC": 155
+        },
+        {
+            "id": 1,
+            "enabled": true,
+			"REF": 14,
+			"RFC": 160
+        },
+        {
+            "id": 2,
+            "enabled": true,
+			"REF": 15,
+			"RFC": 162
+        }
+    ]
+}
+
+When done setting up the configuration file, save it, then go to miner window and press 'r' on your keyboard. This will reload & apply your settings!
+You can do this as many times as you want!
+Find optimal settings for each of your GPU's easily.
+
+Next time when you start SRBMiner and you already have 'gpu_manual_tuning.txt' created & set, miner will auto load it and apply the configuration from it.
+Custom memory timings without the need to modify your GPU's bios!
\ No newline at end of file

Help/Gpu_Tweaking_And_Boost.txt

+Supported:
+[ VEGA56/64/FE/VII ] & [ RX 550/560, RX 470/480/570/580/590 ] & [ R9 280/290/380/390 ]
+
+If you previously started a monitoring software like HWinfo or GPU-Z, tweaks can't get applied, a machine restart is needed!
+
+
+
+--gpu-tweak-profile
+
+1. Miner must run with administrator/root privileges
+2. Be patient, it takes some time to find optimal settings for your gpu/rig. Always test 1 card at a time.
+3. If you start getting invalid shares or compute errors, that means the profile is too much for that gpu, so lower it.
+
+Tweak levels 0 - 10 :
+
+0 - no change, uses your original settings
+1 - light tweak
+.
+.
+.
+10 - max tweak
+
+Not every gpu can handle the same profile, so you need to find the right one for every gpu you have.
+Every profile has also weaker (low) settings. To use the low profile, add L after the profile number ( example: --gpu-tweak-profile 5L )
+
+If using config file, you must surround the value with quotation marks if you want to use the L profile. Example : "5L"
+
+
+--gpu-boost
+
+1. Miner must run with administrator/root privileges
+2. If you start getting invalid shares or compute errors, that means the boost value is too much for that gpu, so lower it.
+
+This option is same as the famous 'rx-boost' which can be found in other miners. 
+It's value goes from 0 to 50.
+
+
+--gpu-extra-config
+
+This parameter accepts some additional parameters (parameter for parameters, right) that can be / doesn't have to be algorithm specific.
+Right now it has only one parameter that it can set. In the future if more parameters will be added they will be separated with ':' .
+
+Parameters by order :
+
+1. Thread delay
+This one sets the predefined delay (in seconds) that needs to be maintained between worker threads on same GPU for same algorithm. It is used only if a GPU is using 2+ threads per algorithm.
+Accepted values : a b c d e f g h i j k l m n o p q r s t u
+
+a = 1.00
+b = 0.95
+c = 0.90
+.
+.
+.
+u = 0.00
+
+Example (set thread delay for every GPU to 0.90):
+SRBMiner-MULTI.exe --disable-cpu --algorithm cryptonight_xhv --gpu-extra-config c --pool xxx --wallet xxx
+

Help/Multi_Algorithm.txt

+You can mine up to 4 different algorithms at the same time.
+Different combinations are available:
+
+- Mine 4 different algorithms on the same GPU
+- Mine 4 different algorithms on distinct GPU's
+- Mine 4 different algorithms mixed CPU+GPU
+
+If an algorithm can't be mined on a GPU device, it will only be mined on CPU.
+
+There are 4 job handling modes available for you when mining multiple algorithms, and they can be set with parameter '--multi-algorithm-job-mode'
+
+0: no redirect
+1: redirect always to a0
+2: redirect to next available algorithm
+3: work on a1 jobs only when a0 doesn't have anything to work on
+
+Job handling is available both to CPU and GPU mined algorithms.
+It is advised to use parameter '--enable-workers-ramp-up', to avoid a potential system crash when all the workers try to allocate their resources at the same time.
+
+
+What does this do ?
+
+A quick example is the best way to understand :
+
+You set two algorithms to mine, for example algorithm 0 to run on 2 GPU's and algorithm 1 on 4 GPU's.
+
+If for some reason the pool you are mining on algorithm 1 disconnects (and you did not define failover pools), the GPU's that were mining algorithm 1 would now be idling, right?
+Well, SRBMiner can take over jobs from algorithm 0 and work on them with those GPU's that would otherwise be idling, until the pool for algorithm 1 becomes available again!
+
+After connecting back to algorithm 1 pool, the 4 GPU's will return back and continue working on jobs for algorithm 1!
+
+Notice:
+There is a simple rule for all multi algorithm aware parameters : separate algorithm settings with ';' and things within a specific algorithm with '!'
+You can set multi algorithm mining only with cmd parameters, configuration files can set only 1 algorithm.
\ No newline at end of file

Help/Other/Dual-mining-ZIL.txt

+You can 'dual' mine ZIL with any other algorithm that is supported in SRBMiner-MULTI.
+
+Popular combinations:
+
+ZIL + ETH	= 8GB
+ZIL + ERGO	= 4GB, 8GB
+ZIL + VERT	= 4GB, 8GB
+ZIL + XHV	= 4GB, 8GB
+
+Important:
+ZIL must be defined as A0 (first algorithm)!
+Devfee for ZIL won't be mined, only for the second algorithm.
+
+If you want to 'dual' mine algorithms that cant fit their data together in the GPU VRAM, but can separately, set parameter --gpu-buffer-mode to 1. (Check Cmd_Gpu_Parameters.txt)
+Example : ZIL + XHV on a 4GB gpu. To get the max performance on both algorithms, you need to set --gpu-buffer-mode to 1 on that GPU.
+
+
+
+Examples:
+
+1. ZIL + ETH
+
+Mine ZIL on ezil.me pool, ETH on herominers pool
+-------------------------------------------------
+SRBMiner-MULTI.exe --disable-cpu --a0-is-zil --multi-algorithm-job-mode 3 --algorithm ethash;ethash --pool eu.ezil.me:5555;ethereum.herominers.com:10200 --wallet ethereum-wallet.zilliqa-wallet.zil-worker-name;ethereum-wallet --password x;herominers-worker --gpu-boost 3;0
+	
+	
+Mine ZIL on shardpool.io pool, ETH on herominers pool
+-------------------------------------------------
+SRBMiner-MULTI.exe --disable-cpu --a0-is-zil --multi-algorithm-job-mode 3 --algorithm ethash;ethash --pool eu1-zil.shardpool.io:3333;ethereum.herominers.com:10200 --wallet ethereum-wallet;ethereum-wallet --password zilliqa-wallet@ethereum.herominers.com:10200;herominers-password --worker zil-worker;herominers-worker --gpu-boost 3;0
+	
+	
+	
+2. ZIL + ERGO
+	
+Mine ZIL on ezil.me pool, ERGO on herominers pool
+-------------------------------------------------
+SRBMiner-MULTI.exe --disable-cpu --a0-is-zil --multi-algorithm-job-mode 3 --algorithm ethash;autolykos2 --pool eu.ezil.me:5555;ergo.herominers.com:10250 --wallet ethereum-wallet.zilliqa-wallet.zil-worker-name;ergo-wallet --password x;herominers-worker --gpu-boost 3;0
+	
+	
+Mine ZIL on shardpool.io pool, ERGO on herominers pool
+-------------------------------------------------
+SRBMiner-MULTI.exe --disable-cpu --a0-is-zil --multi-algorithm-job-mode 3 --algorithm ethash;autolykos2 --pool eu1-zil.shardpool.io:3333;ergo.herominers.com:10250 --wallet ethereum-wallet;ergo-wallet --password zilliqa-wallet@ergo.herominers.com:10250;herominers-password --worker zil-worker;herominers-worker --gpu-boost 3;0
+
+
+
+3. ZIL + VERT
+	
+Mine ZIL on ezil.me pool, VERTCOIN on zergpool
+-------------------------------------------------
+SRBMiner-MULTI.exe --disable-cpu --a0-is-zil --multi-algorithm-job-mode 3 --algorithm ethash;verthash --pool eu.ezil.me:5555;verthash.eu.mine.zergpool.com:4534 --wallet ethereum-wallet.zilliqa-wallet.zil-worker-name;vertcoin-wallet --password x;c=VTC,mc=vtc --gpu-boost 3;0
+
+
+
+
+
+
+
+HiveOS:
+
+Mine ZIL on ezil.me pool, ERGO on herominers pool
+-------------------------------------------------
+
+1. Flight Sheets
+
+Coin		: ETH
+Wallet		: add something, we won't be using this wallet anyway
+Pool		: Configure in miner
+Miner		: SRBMiner-MULTI
+
+2. Click 'Setup Miner Config' in Miner tab
+
+Hash algorithm	: Ethash
+Wallet		: ethereum-wallet.zilliqa-wallet.worker-name
+Worker name	: 
+Pool		: eu.ezil.me:5555
+Pass		: 
+Plugin and ..	: --disable-cpu --a0-is-zil --multi-algorithm-job-mode 3 (one per line!)
+
+Hash algorithm	: autolykos2
+Wallet		: ergo-wallet
+Worker name	: 
+Pool		: ergo.herominers.com:10250
+Pass		: worker-name

Help/Other/Enable-Huge-Pages-Windows.txt

+Note: if you have Windows Home edition you first need to enable gpedit : https://www.itechtics.com/enable-gpedit-windows-10-home
+
+1. Start 'Local Group Policy Editor', you can do this by pressing 'start' and typing 'gpedit'
+2. Navigate to Windows Settings -> Security Settings -> Local Policies -> User Rights Assignment
+3. 'User Rights Assignment' will be on the left side panel, click on it and more options will appear on the right side panel
+4. Find 'Lock Pages In Memory' and double click on it
+5. Click on 'Add User Or Group' 
+6. You should add the user/s you use on your system. The easiest way is to list them then select the one/s you want.
+7. Click on 'Advanced' then on 'Find Now'. In the search results double click on the user you want to add.
+8. Reboot computer
+
+If you did everything right, SRBMiner-Multi should show on initialization that Huge-pages are enabled.
\ No newline at end of file

mmp-external.conf

@@ -16,7 +16,7 @@ EXTERNAL_PROTOCOL="srbminer"
 EXTERNAL_ARCH="amd"
 
 # Version if provided
-EXTERNAL_VERSION="0.8.5"
+EXTERNAL_VERSION="0.8.7"
 
 # Miner executable binary
 EXTERNAL_BIN="SRBMiner-MULTI.exe"

mmp-release-notes.txt

-Performance increase on 'heavyhash' algorithm for VEGA/RDNA/RDNA2 GPU's
-Fixed 'verushash' algorithm 'invalid solution version' error
+Fixed hashrate regression on 'heavyhash' algorithm for Navi cards
+Fixed 'progpow' algorithms that got broken in previous release (0.8.6)